PFS(glass、COC/COP)
Nov. 11, 2026
Prefilled syringe (PFS) leak testing is an essential part of pharmaceutical container closure integrity testing (CCIT). It evaluates whether a prefilled syringe can maintain its sealing performance and protect injectable drug products from leakage, contamination and loss of product integrity.
Zholion provides pharmaceutical leak detection solutions for glass, cyclic olefin copolymer (COC) and cyclic olefin polymer (COP) prefilled syringes. Our solutions cover multiple CCIT technologies, specialized testing equipment and customized positive control samples for pharmaceutical packaging evaluation, method validation and quality control.
Understanding PFS Container Closure Integrity
A prefilled syringe consists of several components, including a syringe barrel, plunger stopper, tip cap or needle shield, and sometimes an attached needle. Each component and its sealing interface contributes to the overall container closure integrity.
Potential leakage pathways may occur due to:
-
Cracks, pinholes or defects in the syringe barrel
-
Improper sealing between the plunger stopper and barrel
-
Inadequate tip cap or needle shield closure
-
Leakage around needle attachment interfaces
-
Dimensional variations or improper component assembly
Glass, COC and COP syringes have different physical and mechanical properties. Therefore, the selection of a suitable PFS leak test method should consider the syringe material, closure design, product formulation and required detection sensitivity.
PFS Leak Test Methods
Different container closure integrity testing technologies can be used to evaluate prefilled syringe leakage. These methods are generally divided into deterministic and probabilistic approaches.
Deterministic Leak Testing Methods
Deterministic methods use measurable physical or chemical principles to detect leakage. They provide objective test results and are generally preferred for routine pharmaceutical package integrity testing when technically suitable.
High Voltage Leak Detection (HVLD)
HVLD applies a high-voltage electrical field to identify potential leakage pathways in compatible liquid-filled pharmaceutical containers. It is a non-destructive method suitable for certain glass and polymer prefilled syringes, depending on liquid conductivity, package materials and configuration.
Vacuum decay testing monitors pressure changes inside a sealed test chamber to identify leakage. It is a non-destructive quantitative method that can be applied to compatible prefilled syringe configurations.
Pressure Decay Testing
Pressure decay evaluates package integrity by monitoring pressure changes under controlled positive-pressure conditions. Its suitability depends on syringe structure, mechanical strength and test configuration.
Helium Leak Testing
Helium leak testing uses helium as a tracer gas to identify and quantify leakage pathways. It is particularly useful for sensitive leak detection, package development and quantitative container closure integrity evaluation.
Laser-Based Headspace Analysis
Laser-based headspace analysis measures gas properties within a suitable sealed container without opening the package. It can be considered for compatible prefilled syringe configurations with appropriate headspace conditions.
Probabilistic Leak Testing Methods
Probabilistic methods depend on multiple testing conditions and events that can influence the detection results. They are commonly used for selected package development, validation and comparative evaluation activities.
Dye Ingress Testing
Dye ingress testing uses a colored solution to identify leakage pathways through dye penetration. It is a destructive method that provides visual evidence of potential package leakage.
Microbial Ingress Testing
Microbial ingress testing evaluates whether microorganisms can penetrate a container closure system under specified challenge conditions. It is generally used in pharmaceutical packaging development and validation studies.
Bubble Emission Testing
Bubble emission testing identifies gross leakage by observing bubbles escaping from a submerged package under specified pressure conditions.
More container closure integrity testing methods
PFS Leak Test Equipment from Zholion
Zholion provides different CCIT equipment solutions for pharmaceutical prefilled syringe testing, covering both deterministic and probabilistic detection technologies.
For non-destructive testing of compatible liquid-filled syringes, the MC-E24 High Voltage Leak Detector uses HVLD technology to identify potential leakage pathways. The MC-V12 Vacuum Decay Leak Detector and RC-V12 Automatic Vacuum Decay Leak Detector provide pressure-based testing solutions for suitable package configurations. For applications requiring sensitive tracer gas detection and quantitative leak evaluation, the MC-H52 Helium Leak Detector offers another testing option.
Zholion also provides the MC-DUO(VP) Dual System Packaging Leak Detector, integrating vacuum decay and pressure decay testing configurations for different package integrity evaluation requirements.
For probabilistic testing applications, the MC-B82 Negative Pressure Leak Detector supports dye ingress, microbial ingress and bubble emission testing. The MC-D73 Positive & Negative Pressure Leak Detector supports dye ingress and microbial ingress testing with automatic positive and negative pressure switching.
Each system serves different testing purposes. Equipment selection should be based on the actual PFS structure, sample characteristics, required test method and validation objectives.
Customized PFS Positive Control Samples
In addition to leak testing equipment, Zholion provides customized positive control samples for prefilled syringe container closure integrity testing.
Positive control samples contain known or predefined defects or leakage pathways. They help pharmaceutical manufacturers and testing laboratories evaluate whether a leak detection system can identify specific defects under established test conditions.
These samples can support:
-
Leak detection equipment performance verification
-
CCIT method development and validation
-
Detection sensitivity evaluation
-
Laboratory quality control
-
Operator training and testing procedure evaluation
Zholion supports customized positive control samples for glass, COC and COP prefilled syringes. Customization can cover syringe dimensions, packaging structures and predefined defect characteristics according to the intended testing method.
Using suitable positive control samples helps evaluate detection performance and supports consistent testing procedures. Where quantitative leak performance is required, defect characteristics and reference leakage values should be established and documented.
Why Choose Zholion for PFS Leak Testing?
Zholion combines pharmaceutical leak detection equipment with customized positive control sample solutions to support different prefilled syringe testing requirements.
Our portfolio covers multiple detection technologies, including HVLD, vacuum decay, pressure decay, helium leak testing, dye ingress and microbial ingress. This gives pharmaceutical manufacturers more flexibility when evaluating suitable CCIT methods for different package configurations.
We also support testing projects involving glass, COC and COP prefilled syringes, with equipment selection and sample customization based on actual application requirements.
From leak detection equipment to positive control samples for method validation and performance verification, Zholion provides integrated support for pharmaceutical container closure integrity testing projects.
Frequently Asked Questions About PFS Leak Testing
What Is PFS Leak Testing?
PFS leak testing evaluates the container closure integrity of prefilled syringes to identify potential leakage pathways and assess whether the packaging can maintain its protective function.
Can Glass, COC and COP Prefilled Syringes Use the Same Leak Test Method?
Not necessarily. Different materials have different electrical, mechanical and physical properties. Testing method suitability should be evaluated according to the syringe design, product formulation and required detection sensitivity.
Which Leak Test Method Is Suitable for Prefilled Syringes?
Potential methods include HVLD, vacuum decay, pressure decay, helium leak testing, dye ingress and microbial ingress. The final selection depends on the packaging configuration and testing objectives.
Can Zholion Provide PFS Positive Control Samples?
Yes. Zholion provides customized PFS positive control samples to support equipment performance verification, CCIT method validation and detection sensitivity evaluation.
What Is the Difference Between Deterministic and Probabilistic Leak Testing?
Deterministic methods use measurable physical or chemical principles to detect leakage. Probabilistic methods depend on multiple testing conditions and events that may influence the test results.
Is PFS Leak Testing Destructive?
It depends on the selected method. HVLD, suitable vacuum decay configurations and certain helium leak testing setups can be non-destructive. Dye ingress and microbial ingress testing are generally destructive.
What Information Is Needed to Select PFS Leak Testing Equipment?
Useful information includes syringe material, dimensions, closure design, product fill condition, target leak size, testing purpose and required detection method. Technical drawings and actual samples can help determine a suitable testing configuration.
Request a PFS Leak Testing Solution
Looking for a reliable PFS leak test solution for glass, COC or COP prefilled syringes?
Zholion provides pharmaceutical CCIT equipment and customized positive control samples for equipment verification, method validation and leak detection evaluation.
Contact our team with your syringe specifications, testing requirements and sample details. We will help evaluate suitable testing technologies and equipment configurations for your project.
Related Solutions
-
Sep. 04, 2026
-
Sep. 04, 2026
-
Aug. 03, 2026
-
Laser-based Headspace Analysis
Sep. 04, 2026
-
Jun. 26, 2026
Related Products

