Resources
With our deep research and rich experience, we provide such resources for your better understanding about CCI and Zholion.
-
ECA released Version 3.0 of "The GMP/GDP Questions & Answers Guide."
This guide compiles common and challenging questions in GMP/GDP practices in a Q&A format.
-
Vacuum Decay Leak Testing vs. Pressure Decay Testing
If you are comparing vacuum decay leak testing vs. pressure decay testing, you are probably facing the same three pain points many production teams report: unstable pass/fail results, difficult troubleshooting on microleaks, and rising scrap costs after final assembly. In packaging, medical device, automotive, and electronics lines, a leak test method is not just a quality checkbox; it affects
-
What Is a Micropipette Positive Control Sample and Why Is It Important?
A micropipette positive control sample is a known, verified sample used to confirm that a micropipette, its tips, and the operator’s handling method are all working correctly in a laboratory workflow. In simple terms, it is the “check sample” that tells you whether liquid transfer is accurate and reliable before you trust your test results. For businesses in diagnostics, life sciences, and
-
Top 5 Leak Tester Machine Companies
For manufacturers facing pressure decay leak tester machine selection, vacuum leak testing equipment comparison, and industrial leak detection systems integration, the real challenge is not “which machine looks best,” but which supplier can reduce reject rates, shorten test cycles, and fit the exact production scenario. In food packaging, automotive components, and medical device plants, even
-
HVLD Testing Risks: Does It Damage Liquid Products?
High Voltage Leak Detection, also called HVLD, is widely used to check sealed liquid products for leaks. Many buyers ask one key question before using it: can HVLD damage the liquid product itself? The short answer is that, when set up correctly, HVLD is designed to be a non-destructive leak detection method. It can help protect sterile liquid product quality, improve package integrity testing,
-
Custom Positive Controls for Non-Standard Packaging
Custom positive controls for non-standard packaging help verify that a leak test system is working the way it should. If your package shape is unusual, a standard test part may not fit the real use case. This can create weak test results and missed defects. In industries that use vacuum decay, pressure decay, and dye ingress testing, the control sample must match the package design closely. That
-
FDA 2026 Draft Guidance: What Pharmaceutical Manufacturers Need to Know About CCIT
FDA’s 2026 Draft Guidance on Container Closure Systems for Human Drugs and Biological Products introduces updated recommendations for container closure integrity testing (CCIT), with particular emphasis on sterile products, method validation, worst-case conditions, stability studies, transportation and storage, and advanced deterministic integrity testing technologies.
-
Helium Backfill Process for Leak Test Validation
Helium leak testing is a reliable way to check whether a sealed part or system has any unwanted openings. In many industries, the helium backfill process helps confirm that the leak test is valid and repeatable. It is used with mass spectrometer leak detector systems, vacuum leak testing, and pressure decay checks. If the process is not controlled well, the results can be wrong and the product









